Show simple item record

dc.contributor.authorJing-Yuan Lin
dc.contributor.authorKuan-Hung Chen
dc.contributor.authorPin-Hsian Liu
dc.contributor.authorHsuan-Yu Yueh
dc.contributor.authorYi-Feng Lin
dc.contributor.otherDepartment of Electronic and Computer Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan
dc.contributor.otherDepartment of Electronic and Computer Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan
dc.contributor.otherDepartment of Electronic and Computer Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan
dc.contributor.otherDepartment of Electronic and Computer Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan
dc.contributor.otherDepartment of Electronic and Computer Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan
dc.date.accessioned2021-04-27T00:02:20Z
dc.date.available2025-10-02T04:03:47Z
dc.date.issued01-04-2021
dc.identifier.issn-
dc.identifier.urihttps://www.mdpi.com/1996-1073/14/9/2470
dc.description.abstractRecently, three-phase series-resonant converters (SRCs) have been proposed for high power applications. Three-phase SRCs can achieve zero-voltage-switching (ZVS) of the primary power switches and regulate the output voltage by pulse-frequency modulation. The interleaving technique is also a conventional method for DC-DC converters to achieve a high power level, reducing the output voltage ripples due to operating out of phase at the same frequency between the two converters. However, an interleaved three-phase SRC cannot easily synchronize switching instants between the two modules due to the component tolerances of circuits. In the proposed control method, phase shift modulation (PSM) is used to solve the output current imbalance caused by component tolerances. The power switches of the converter can also maintain synchronizing switching instants between the two modules. Therefore, the lower output voltage ripple can be achieved. A detailed analysis and design of this new control method for interleaved three-phase SRCs are described. Finally, prototype converters with a 2.4 kW total output were built and successfully tested to verify the feasibility of the current sharing modulation.
dc.format-
dc.language.isoEN
dc.publisherMDPI AG
dc.relation.uri['https://www.journals.elsevier.com/infectious-medicine', 'https://www.elsevier.com/authors/open-access/choice#waivers', 'https://www.elsevier.com/journals/infectious-medicine/2772-431X/guide-for-authors']
dc.rights['CC BY', 'CC BY-NC-ND']
dc.subject['human infectious diseases', 'epidemiology', 'vaccine', 'pathogenesis', 'public health policies', 'Infectious and parasitic diseases', 'RC109-216']
dc.subject.lccTechnology
dc.titleCurrent Sharing Control of an Interleaved Three-Phase Series-Resonant Converter with Phase Shift Modulation
dc.typeArticle
dc.description.keywordscurrent sharing
dc.description.keywordsLLC-SRC
dc.description.keywordsinterleaved
dc.description.pages-
dc.description.doi10.3390/en14092470
dc.title.journalEnergies
dc.identifier.e-issn1996-1073
dc.identifier.oaioai:doaj.org/journal:0c33b61264054bb79a9097b54b2dae19
dc.journal.infoVolume 14, Issue 9


This item appears in the following Collection(s)

Show simple item record